Model CCUC-150ASM
Brand Coolinkpros
Product 15HP Mid-High Temp. iUnit CDU+Air cooler
Rotary Mid-Low Temp.CDU Catalog
Introduction:
Scroll Mid-High Temp. packaged CDU set is equipped with Copeland Scroll Compressor(w/wo Vapor Injection). R404A refrigerant pre-charged.
It's suitable for the cold-storage temp.
Mid-Temp.: -18℃～+10℃
Nominal capacity from 2~15HP.
Features:
1. Applying coldroom temperature: -30℃～+10℃;
2. Fuzzy control of EXV; greatly improved the unit cooling efficiency, fast and stable superheat control;
3. Intelligent hot gas defrost technology,adapted with hot gas defrost air cooler,the defrost time greatly shortered (about 70% reduced),energy saving （about 80% reduced), temperature rising range is small （5℃~7℃，the traditional unit 12℃~15℃）.
4. Condenser fan speed control according condensing temp., applicable to a wider range of ambient temperature: -15℃～+48℃；
5. Easy installation, Optimized testing & commission, Smart startup self-diagnostic function;
Remote monitoring and maintenance module(Optional)
6. Large air volume and area, 100% heat exchange capaicty with all 4.5mm fin space Air cooler;
7. Hotgas defrosting design, no fin electric heater required.
Configuration:
Fuzzy control of EXV
Smart Hot-gas defrost on demand
Intelligent controller for complete system control
Intelligent Fan speed control
Oil separator/Accumulator + Economizer + Pressure sensors
R404A refrigerant pre-charged
Standard installation and Optimized testing & Commissioning
4.5mm fin space Air cooler
Specifications:
| MODEL CDU | CCUC--150ASM |
| EVAPORATOR | CAE-150/453R45A |
| Electric Power | 3 phase 50Hz, 380/415V |
| Norminal HP | 15HP |
| Refrigerant | R404A |
| COMPRESSOR Type | COPELAND SCROLL |
| Model | ZB114KQE |
| Capacity (W) * | 18300 |
| Power Input (W) ** | 11220 |
| COP | 1.6 |
| Motor LRA (A) | 174 |
| Motor MOC (A) | 40 |
| Oil Type | POE |
| Condenser Model | G-SU150 |
| Condenser Fan Size | 560 |
| Qty of Fan | 2 |
| Liquid Line | 7/8" |
| Suction Line | 1 3/8" |
| Dimension (W X D X H) | 774 x 1460 x 1003 |
| Weight (KG) | 250 |
| EVAPORATOR | CAE-150/453R45A |
| Evaporator Fan Size | 450 |
| Qty of Fan | 3 |
| Fan Motor Voltage | 1 phase 50Hz, 220/240V |
| Air Flow Distance (m) | 15 |
| Air Volume (m3/hr) | 5580 x3 |
| Fin Spacing (mm p/inch) | 4.5 |
| Power Input Fanset (W) | 280 x 3 |
| Drain Pan Heater Power (W) | 1300 |
| Drain Pipe Size | 1" |
| Dimension (W X D X H) | 1877x 487 x 827 |
| Weight | 96 |
** Power input data refer to above capacity basis. For rotary Unit, the capacity based on evaporating temp.at -40°C, and condensing temp.at 45°C. For low-temp Scroll Unit. the capacity based on evaporating temp. at -40°C, condensing temp. at 40°C* Capacity. For mid-temp.Scroll Unit, 3HP-10HP the capacity based on evaporating temp. at -25°C, condensing temp. at 40°C; 13HP-15HP based on evaporating temp.at -20°C, and condensing temp.at 40°CRemarks:
Model CCUC-150ASM
Brand Coolinkpros
Product 15HP Mid-High Temp. iUnit CDU+Air cooler
Rotary Mid-Low Temp.CDU Catalog
Introduction:
Scroll Mid-High Temp. packaged CDU set is equipped with Copeland Scroll Compressor(w/wo Vapor Injection). R404A refrigerant pre-charged.
It's suitable for the cold-storage temp.
Mid-Temp.: -18℃～+10℃
Nominal capacity from 2~15HP.
Features:
1. Applying coldroom temperature: -30℃～+10℃;
2. Fuzzy control of EXV; greatly improved the unit cooling efficiency, fast and stable superheat control;
3. Intelligent hot gas defrost technology,adapted with hot gas defrost air cooler,the defrost time greatly shortered (about 70% reduced),energy saving （about 80% reduced), temperature rising range is small （5℃~7℃，the traditional unit 12℃~15℃）.
4. Condenser fan speed control according condensing temp., applicable to a wider range of ambient temperature: -15℃～+48℃；
5. Easy installation, Optimized testing & commission, Smart startup self-diagnostic function;
Remote monitoring and maintenance module(Optional)
6. Large air volume and area, 100% heat exchange capaicty with all 4.5mm fin space Air cooler;
7. Hotgas defrosting design, no fin electric heater required.
Configuration:
Fuzzy control of EXV
Smart Hot-gas defrost on demand
Intelligent controller for complete system control
Intelligent Fan speed control
Oil separator/Accumulator + Economizer + Pressure sensors
R404A refrigerant pre-charged
Standard installation and Optimized testing & Commissioning
4.5mm fin space Air cooler
Specifications:
| MODEL CDU | CCUC--150ASM |
| EVAPORATOR | CAE-150/453R45A |
| Electric Power | 3 phase 50Hz, 380/415V |
| Norminal HP | 15HP |
| Refrigerant | R404A |
| COMPRESSOR Type | COPELAND SCROLL |
| Model | ZB114KQE |
| Capacity (W) * | 18300 |
| Power Input (W) ** | 11220 |
| COP | 1.6 |
| Motor LRA (A) | 174 |
| Motor MOC (A) | 40 |
| Oil Type | POE |
| Condenser Model | G-SU150 |
| Condenser Fan Size | 560 |
| Qty of Fan | 2 |
| Liquid Line | 7/8" |
| Suction Line | 1 3/8" |
| Dimension (W X D X H) | 774 x 1460 x 1003 |
| Weight (KG) | 250 |
| EVAPORATOR | CAE-150/453R45A |
| Evaporator Fan Size | 450 |
| Qty of Fan | 3 |
| Fan Motor Voltage | 1 phase 50Hz, 220/240V |
| Air Flow Distance (m) | 15 |
| Air Volume (m3/hr) | 5580 x3 |
| Fin Spacing (mm p/inch) | 4.5 |
| Power Input Fanset (W) | 280 x 3 |
| Drain Pan Heater Power (W) | 1300 |
| Drain Pipe Size | 1" |
| Dimension (W X D X H) | 1877x 487 x 827 |
| Weight | 96 |
** Power input data refer to above capacity basis. For rotary Unit, the capacity based on evaporating temp.at -40°C, and condensing temp.at 45°C. For low-temp Scroll Unit. the capacity based on evaporating temp. at -40°C, condensing temp. at 40°C* Capacity. For mid-temp.Scroll Unit, 3HP-10HP the capacity based on evaporating temp. at -25°C, condensing temp. at 40°C; 13HP-15HP based on evaporating temp.at -20°C, and condensing temp.at 40°CRemarks:
